|
H&C® Infusion Solvent Based Sealer is a unique combination
of modified thermoplastic acrylic resins. This unique combination
works as a sealer over H&C®
Infusion Reactive Concrete
Stain. Contains U.V inhibitors that provide a uniform non-yellowing
film. H&C® Infusion Solvent Based Sealer can be used
for interior or exterior applications.
H&C® Infusion Solvent Based Sealer is used to seal
any floor that has been stained using H&C® Infusion
Reactive Concrete Stain. Sealer may also be used by itself.
You will need a: Brush, Roller, Airless Sprayer, Xylene Solvent
(for clean-up)
- Infusion Reactive Stain residue MUST be removed prior
to applying sealer.
- Surface must be dry 24 hours after final rinsing of removing
residue.
- Read all cautions and MSDS before any work is started
Thinning
- FOR PROFESSIONAL USE ONLY! Always do a test area
to ensure compatibility. H&C® Infusion Solvent Based
Sealer can be applied brush, airless spray or a short nap
roller
- Wait at Least 24 hours after removing residue. Apply under
dry conditions only. Application to a damp surface may cause
a hazy appearance or loss of adhesion.
- Air and surface temperature should be between 50° and
90°F for 24 hours following application.
- Do not reduce
Brush
Use a natural bristle brush.
Roller
Use a 1/4"-3/8" nap lambs wool roller.
Sprayer
Tip...................................... .013"-.015"
First Coat: 350-400 sq. ft/gal Coverage will vary depending
on the porosity of the concrete
Second Coat: 400 sq. ft/gal.
Dry Time
Drying Time: @ 77°F 50% RH:
Temperature and humidity dependent.
| Touch |
20 minutes |
| Recoat |
8 hours |
| Heavy Traffic |
24 hours |
|
