H&C^® Shield-Crete Acrylic Clear Glaze
H&C^® Shield-Crete Acrylic Clear Glaze is a low VOC, one component clear waterborne acrylic sealer. The Glaze will provide superior protection for the Shield-Crete decorative flakes, easier cleaning, and provide an even glossier finish. The Glaze is required when Deco-Flakes exceeds 50% coverage.

Recommended Uses:

• Garage Floors
• Patios and Walkways
• Pool Decks
• Athletic Courts
• Basement Floors

Important Things to Keep in Mind

Weather Conditions

• Install at temps between 60ºF & 90ºF and when relative humidity is less than 80%.

• Clean spills and spatters immediately with soap and warm water. Sticky resin or residue on hands can be removed with isopropyl alcohol.

Application Methods

• Brush—Use a nylon/polyster brush
• Roller—Use a high quality 1/4"-3/8" nap roller cover
• Allow Shield-Crete Acrylic Clear Glaze 24 hours drytime before application of the Glaze Coat. Brush and roll the glaze using 1/4" to 3/8" nap roller cover. If a second coat is desired allowed a minimum of 4 hours between applications.

Drying Time

To Touch:	1 hour
Recoat:	Minimum 4 hours
Light traffic:	12 hours
Heavy traffic:	72-96 hours

Spec and Data Sheet   MSDS